Industrial floors

If you need a durable, wear-resistant industrial floor in Moscow or the Moscow region, then you should contact us, the company ATRconstruction. We carry out the installation of industrial floors of various structures and purposes (concrete with topping, epoxy, polymer, etc.) Thanks to our professional equipment, extensive experience in construction and the use of only high-quality proven materials, work on the arrangement of industrial floors will not cause you problems.

Where industrial floors are needed

A high-tech, strong, durable floor is necessary:

in production areas
warehouses
catering facilities
in transport and logistics centers
car services, etc.

Advantages of industrial floors

Smooth, wear-resistant and visually attractive coatings have an ever-growing demand due to:

long service life (about 20 years)
fire safety
antistatic (for chemical plants, laboratories)
resistance to vibration, mechanical heaviness
perfectly flat surface for uninterrupted operation of high-precision devices
absence of dust
anti-slip
ease of maintenance and cleaning
resistance to the destructive effects of chemicals, oils, gasoline, ultraviolet rays

Specifics and features of industrial floors

industrial floors with topping

The type of coverage depends on several indicators. This is, first of all, its purpose, thickness, type of base, method of reinforcement, etc. Based on these parameters , the floors are:

concrete of special strength with topping
epoxy
polyurethane
dust-free polymer
chemical resistant
decorative

Concrete industrial floor with topping of special strength differs significantly from traditional concrete coverings. The reinforced top layer reliably holds heavy loads due to special amplifiers. These include a powder composition applied over fresh concrete or impregnated with mineral or organic mixtures that strengthen the structure of concrete. Liquid impregnations are left on the concrete surface, completely dry and sanded.

There is a method of volumetric topping. This is the reinforcement of the entire floor surface in full thickness.

industrial epoxy floors Resin and hardener are used for the manufacture of epoxy floors. This type of coating differs in thickness, method of application, filling, depending on the operational and economic purpose.

The epoxy floor does not require solvents, its basis is a two–component composition. Less costs are used for its manufacture. The coating is odorless, adheres well to concrete, has a high concentration of quartz sand.

Polyurethane industrial floor is a seamless coating based on several types of polymers. It is produced using special chemical processes that synthesize the mass with appropriate technical criteria. Such floors are in great demand due to minimal shrinkage and strength.

Polymer floor is used as a coating of concrete, cement-sand, tile base. Due to the content of synthetic resins, the surface has a number of important advantages. The coating is a monolithic non-dusting coating consisting of polyurethane or epoxy binders, which are applied in a second layer on a stable starting base. When installing a polymer floor, you can not do without impregnation:

Acrylic, forming a film on the concrete surface, reducing water absorption.
Polyurethane. Penetrating inside, they hide small defects on the surfaces. The impregnations are resistant to low temperatures, guarantee maximum dust removal, and are shock-resistant.
Epoxy. They are used at temperatures above zero, have the quality of polyurethane impregnations, but their use is available only at temperatures above zero.

Chemical-resistant industrial floor is in demand in the high-risk zone. The quality of the coatings of such floors is due to a combination of special hybrid resins, fillers, colored sand. Smooth coatings are durable. They withstand heavy loads, temperature changes, resistant to chemical and mechanical damage.

Industrial decorative floor is a universal finishing coating for any type of foundation. The coating material can be PVC tile or rubber. The tile material can be of various degrees of wear resistance, with an embossed or smooth surface.

Production technology of industrial floors with topping

industrial floor technology

The main material for the installation of industrial floors is concrete M350. The work itself is built in exact accordance with the technology:

Arrangement of the territory and creation of the corresponding project. Conducting water and light, creating the necessary temperature regime.
Geodetic measurements, soil analyses. To prepare the concrete base, the floor surfaces are cleaned of stones and dirt, large irregularities and cracks are removed.
Laying waterproofing.
Distribution and placement of beacons.
Installation of reinforcing reinforcement with the addition of metal fiber.
The supply of gasoline pumps, the distribution of concrete mortar.
Correction of surfaces by trowels of concrete finishing devices.
Ranking of corundum topping in two layers. Other polymers can also be used.
Production of seams, filling them with sealants.
Grinding with a grout machine.

Why choose ATRconstruction

Our company:

has extensive experience in construction and rough finishing works, including the arrangement of floors in a mechanized way
uses only modern professional construction equipment and the best materials
guarantees high quality and long service life of industrial floors
complies with all deadlines and carries out work according to established technologies and standards
establishes a democratic pricing policy

Our brigades in the Moscow region

Moscow
Podolsk
Odintsovo
Istra
Domodedovo
Chekhov

Price list:

Want to reduce
the cost of your artwork?

Pay the full amount of the contract and get an additional 5% discount.

Would you like to pay for a job
upon completion?^*

We can build everything with our own money, but it will cost you an additional 10%.

^*Only with an agreement with the owner of the premises.

COST CALCULATOR

Use the form to estimate the initial cost of an upgrade or installation.

CALCULATE THE PRICE

Download a standard contract

I have my own house, I'm building gradually, I decided to do as many hired a team through friends to plaster the walls, bought the material and it started. (I paid this crew for unloading, then for lifting, bought a bunch of everything for living. The guys worked for a couple of days, they didn't really like the quality (the hard workers said that everything would be fine in the end), but I didn't trust them, called a friend who was fumbling in the construction site, set a rule and realized that the quality was sad. The hard workers said that they always do this and this is normal. Kicked out, flew in almost 40 thousand. I started calling companies, agreed, 3 weeks have passed, then the team is busy, then something else. As a result, I studied the market well, climbed on the Internet. I called APR Construction, talked to Ilya. The next day in the morning there was a material, an engineer, a team. After 5 days, the house is ready, Checked, the level of work, really TOP.
"We would like to thank the company for ATR construction for the work carried out and the high-quality completion of the project. The project had a very tight schedule, but the company coped and the work was completed on time. Thank you, we recommend it!!!"
"We would like to thank the company for our renovated facility located in Moscow, and for the outstanding efforts made to complete the project quickly and efficiently. The project had a very tight schedule, but the company coped and the work was completed on time. Thank you, we recommend it!!!"
"We would like to thank the company for our renovated facility located in Moscow, and for the outstanding efforts made to complete the project quickly and efficiently. The project had a very tight schedule, but the company coped and the work was completed on time. Thank you, we recommend it!!!"