Surface quality category | Purpose | Requirements | Price with material | Comments |
Improved plaster walls (surface area from 250m2 to 400m2) |
| the deviation from the vertical is not more than 2mm by 1m, the deviation from the horizontal is not more than 3mm by 1m, the deviation of the slope width is 3mm | 700 rub/m2 |
|
Improved plaster walls (surface area from 400m2 to 800 m2) |
| the deviation from the vertical is not more than 2mm by 1m, the deviation from the horizontal is not more than 3mm by 1m, the deviation of the slope width is 3mm | 650 rub/m2 |
|
Improved plaster walls (surface area FROM 800 sq. m.M |
| the deviation from the vertical is not more than 2mm by 1m, the deviation from the horizontal is not more than 3mm by 1m, the deviation of the slope width is 3mm | from 600 rubles / m2 |
|
High-quality plaster walls |
| the deviation from the vertical is not more than 0.5 mm by 1m, the deviation from the horizontal is not more than 1mm by 1m, the deviation of the slope width is 2mm | +25% |
|
Simple plaster walls |
| the deviation from the vertical is not more than 3 mm by 1m, the deviation from the horizontal is not more than 3 mm by 1m, the deviation of the slope width is 5mm | -15% |
|
Plastering of individual elements (columns, slopes, crossbars) |
|
| 500 rubles/m |
|
Mark-up for ceiling work |
|
| 20% |
|
Installation of reinforcing mesh |
|
| 100 rub/ m2 |
|
Wall priming with a deep penetration primer |
|
| 35 rub / m2 |
|
Wall priming with concrete contact |
|
| 35 rub / m2 |
|
Applying cement spray |
|
| 120 rub/ m2 |
|
Installing beacons on walls for plastering |
|
| 65 rub / m2 |
|
Improved plastering of walls with gypsum mortar up to 20 mm |
|
| 265 rub / m2 |
|
Improved plastering of walls with cement-sand plaster mix up to 20 mm |
|
| 280 rub / m2 |
|
High-quality plaster of walls with gypsum mortar up to 20 mm |
|
| 318 rub / m2 |
|
High-quality plaster of walls with cement-sand plaster mix up to 20 mm |
|
| 336 rub / m2 |
|
Reinforcement of walls with metal mesh |
|
| 90 rub/ m2 |
|
Plastering of walls with reinforced metal mesh |
|
| 380 rub / m2 |
|
Plastering of walls at negative temperatures |
|
| 550 rub/ m2 |
|
The device of decorative plaster |
|
| 1500 rub / m2 |
|
The device of Venetian plaster |
|
| 1500 rub / m2 |
|
Shagreen Plaster Device |
|
| from 400 rubles / m2 |
|
Installation of a plaster corner |
|
| 110 rub / m2 |
|
Surface gloss |
|
| 50 rub/ m2 |
|
Lifting of the material |
|
| 1500 rubles / ton |
|
Dismantling of plaster |
|
| 150 rub/ m2 |
|
Notching the base |
|
| 70 rub/ m2 |
|
Cleaning the surface from old paint |
|
| 70 rub/ m2 |
|
Plaster of the facade walls |
|
| 450 rub / m2 |
|
Scaffolding Assembly |
|
| 150 rub/ m2 |
|
Ceiling priming with a deep penetration primer |
|
| 35 rub / m2 |
|
Ceiling priming with concrete contact |
|
| 35 rub / m2 |
|
Applying cement spray |
|
| 150 rub/ m2 |
|
Installation of lighthouses on the ceiling for plastering |
|
| 80 rub / m2 |
|
Improved ceiling plaster with gypsum mortar up to 20 mm |
|
| 295 rub / m2 |
|
Improved ceiling plaster with cement-sand plaster mix up to 20 mm |
|
| 310 rubles / m2 |
|
High-quality plaster of the ceiling with gypsum mortar up to 20 mm |
|
| 384 rub / m2 |
|
High-quality ceiling plaster with cement-sand plaster mix up to 20 mm |
|
| 412 rub / m2 |
|
Reinforcement of the ceiling with metal mesh |
|
| 110 rub / m2 |
|
Plastering the ceiling with reinforced metal mesh |
|
| 430 rub / m2 |
|
Plastering the ceiling at subzero temperatures |
|
| 580 rub / m2 |
|
The device of decorative plaster |
|
| 2100 rub / m2 |
|
The device of Venetian plaster |
|
| 2100 rub / m2 |
|
Shagreen Plaster Device |
|
| from 400 rubles / m2 |
|
Installation of a plaster corner |
|
| 110 rubles / m.p. |
|
Surface gloss |
|
| 50 rub/ m2 |
|
Lifting of the material |
|
| 1500 rubles / ton |
|
Dismantling the shtukarki |
|
| 210 rubles / m2 |
|
Notching the base |
|
| 100 rub/ m2 |
|
Cleaning the surface from old paint |
|
| 90 rub/ m2 |
|
Wall priming with a deep penetration primer |
|
| 35 rubles / M.P. |
|
Wall priming with concrete contact |
|
| 35 rubles / M.P. |
|
Applying cement spray |
|
| 120 rubles / m.p. |
|
Installing beacons on walls for plastering |
|
| 65 rubles / M.P. |
|
Improved plastering of walls with gypsum mortar up to 20 mm |
|
| 265 rubles / m.p. |
|
Improved plastering of walls with cement-sand plaster mix up to 20 mm |
|
| 280 rubles / m.p. |
|
High-quality plaster of walls with gypsum mortar up to 20 mm |
|
| 318 rubles / M.P. |
|
High-quality plaster of walls with cement-sand plaster mix up to 20 mm |
|
| 336 rubles / M.P. |
|
Reinforcement of walls with metal mesh |
|
| 90 rubles / M.P. |
|
Floor screed up to 50 mm thick (area 150 - 300 M2) |
|
| 600 rubles/m2 |
|
Floor screed up to 50 mm thick (area 301 - 600 M2) |
|
| 550 rubles/m2 |
|
Floor screed up to 50 mm thick (area from 600 M2) |
|
| 500 rubles/m2 |
|
additional thickness |
|
| 50 rubles/cm |
|
Putty surface quality K1 | the surface for carrying out facing works | For surfaces that do not have visual (decorative) requirements. | 140 rubles/m2 |
|
Putty surface quality K2 | for textural coatings (decorative plaster, structural coatings, heavy wallpaper | For surfaces that are not subject to the usual requirements. (shadows from the side light are allowed, bullies with a depth of no more than 1mm) | 250 rubles/m2 |
|
Putty surface quality K3 | For facing with small-piece and transparent elements, gluing non-woven and paper wallpaper, non-structural matte paints. | It is allowed to have traces of the abrasive used when grinding the surface, but not deeper than 0.3 mm. Shadows from the side light are allowed | 400 rubles/m2 |
|
Putty surface quality K4 | For thin-layer finishing coatings | Scratches, scuff marks, and sinks are not allowed. Shadows from side lights are not allowed | 550 rubles/m2 |
|
Putty of slopes | Performed with moisture-resistant materials |
| 400 rubles/p.m |
|
Mark-up for ceiling work |
|
| 20% |
|
Reinforcement of corners | Installation of metallized corners to strengthen the strength. |
| 110 rubles/p.m |
|
Gluing glass canvas | For painting to align the surface structure |
| 180 rubles/m2 |
|
painting (1 layer) | for utility rooms, technical rooms | Visual inspection at a distance from 2m to the surface | from 150 rubles/m2 | depending on the manufacturer of the paint and palette |
painting (2 layers) | for residential and public premises | Continuous visual inspection | from 300 rubles/m2 | depending on the manufacturer of the paint and palette |
Painting slopes |
|
| from 250 rubles/p.m | depending on the manufacturer of the paint and palette |
Mark-up for ceiling work |
|
| 20% |
|
DETAILED |
|
| | |
Mechanical cleaning of surfaces |
|
| 70 rubles/m2 |
|
Washing with a high-pressure device (Kercher) |
|
| 40 rubles/ m2 | |
Metal degreasing |
|
| 30 rubles/ m2 |
|
Priming with water-based compounds |
|
| 45 rub/m2 | |
Priming with organic compounds |
|
| 70 rubles/m2 |
|
Painting of interior walls |
|
| 80 rubles/m2 | |
Interior ceiling painting |
|
| 90 rubles/m2 |
|
Painting of complex surfaces |
|
| 110 rubles/m2 | |
Painting of facades of buildings |
|
| 55 rubles/m2 |
|
Painting of metal structures on the ground |
|
| 75 rubles/m2 | |
Painting of metal structures at height |
|
| 85 rubles/m2 |
|
Roof painting |
|
| 80 rubles/m2 | |
Pipe painting |
|
| 120 rubles/M.P. |
|
Painting of engineering structures (bridge, crane) |
|
| 115 rubles/m2 | |
Metal painting per ton |
|
| 5,300 rubles/ton |
|
Painting of tanks, tanks |
|
| 95 rubles/m2 | |
Metal fire protection, 30 min. |
|
| 280 rubles/m2 |
|
Metal fire protection, 90 min. |
|
| 580 rubles/m2 | |